Dixon 6520-1099 - Manual (Page 25)

Page 25
OPERATION INSTRUCTIONS
STARTING INSTRUCTIONS:
1. Parking brake must be on, and blade drive disengaged.
2. Move throttle control to "Choke" position if engine is cold, full throttle
if warm.
3. Insert ignition key and turn to "Start" position. When engine starts,
release ignition key. Key will return to "Run" position.
4. Move throttle from "Choke" to desired speed position.
5. Release parking brake.
6. Operate the mower per the "CONTROL" instructions on Page 15.
NOTE: While mowing, "blade(s) engaged", throttle control must be
set to the MAXIMUM or wide open setting to insure adequate
cooling of the engine and to maintain mower deck blade
speed.
Model ZTR 3303 & 3304 Models ZTR 3014