LSC Lighting EKO - Manual (Page 7)

EKO Dimmer
Operator Manual V2.3
LSC Lighting Systems (Aust) Pty. Ltd Page 3
2 PRODUCT DESCRIPTION
2.1 ABOUT THIS MANUAL
This manual describes the installation,
configuration and operation of the EKO range of
slimline wall mount installation digital dimmers
and associated “ePlate” wall controllers
manufactured by LSC Lighting Systems.
2.2 EKO MODELS
The EKO dimmer is available in 4 models
offering a choice of dimmer channel quantities
and power output ratings.
EKO 612/R
12 x 25 Amp Dimmer Channels
(shown with optional RCD Input Breakers)
EKO 312/R
12 x 13 Amp Dimmer Channels
(shown with optional RCD Input Breaker)
EKO 324/R
24 x 13 Amp Dimmer Channels
(shown with optional RCD Input Breakers)
EKO 606
6 x 25 Amp Dimmer Channels
All models can be controlled remotely via DMX
512 from a lighting console or from LSC
ePlates connected via LSCnet or locally from
their front panel LCD Touch Screen
2.3 EPLATES
ePlates ™ – Remote wall station controllers for
the EKO, allow users to recall internal memories
from the EKO for replay at a pre-programmed
level and with a selected fade time.
Note: The EKO dimmer must be fitted with
the LSCnet option to enable operation of
ePlates.
ePlates are available in the following
configurations;
4 Faders 8 Buttons
2 Faders 4 Buttons
1 Fader 2 Buttons
ePlates are connected to the EKO Dimmers via
LSCnet which uses industry standard Cat5
cables and connectors. The ePlate buttons and
faders can be programmed to recall lighting
memories stored in the dimmers or to operate
various EKO functions.
For example, a button might recall an EKO
memory. Another button might switch certain
dimmer channels between DMX control and
Memory (ePlate) control.
2.4 EKO CONTROL PHILOSOPHY
The EKO is an “ARCHI-TAINMENT” dimmer
with architectural control of EKO memories by
ePlates connected via LSCnet and
entertainment control by your lighting controller
connected via DMX-512A.