LSC Lighting EKO - Manual (Page 18)

EKO Dimmer
Operator Manual V2.3
Page 14 LSC Lighting Systems (Aust) Pty. Ltd
5 ePlate & LSCnet Installation
ePlates are the remote wall station controllers
for the EKO dimmers or other LSCnet enabled
products. The ePlates allow you to recall
internal memories from the EKO for replay at a
pre-programmed level and fade time. ePlates
can also be programmed to perform other
functions such as selecting memory or DMX
operation or locking out other ePlates. ePlates
are connected to the EKO dimmers via a
communications bus called LSCnet.
5.1 SPECIFICATIONS
The initial ePlate wall stations are all based on
the Australian standard single gang electrical
switch plate.
The dimensions of the current ePlate are :
• 116mm High
• 76mm Wide
• 40mm Deep
To install the ePlate a hole is required in the
surface or wall where the ePlate is to be
mounted.
Cut Out Dimensions :
• 70mm High
• 50mm Wide
• 25mm Deep
In the future LSC will be offering units to suit
most countries standard switch plates.
5.2 MODELS
ePlates are available with either buttons or
faders.
5.2.1 eButton
Available with 2, 4 or 8 buttons.
Each button can be programmed to control up to
4 independent events, allowing complex
functions to be easily operated by a novice.
Each button has an associated indicator that is
independently programmable.
Buttons can be programmed for any of the
following functions:
• Fade an individual memory to a specific level
in a specific fade time.
• Fade multiple memories to a specific level in
a specific fade time.
• Lock or Unlock other ePlates.
• Turn off all memories.
• Switch specific channels between Memory or
DMX control.
5.2.2 eFader
Available with 1, 2 or 4 faders.
Each fader can be programmed for any of the
following functions:
• Control the level of an individual memory.
• Control the level of multiple memories.
• Act as a MASTER level control over a group
of channels (zone).
• Manual control of a single channel.
• Live fade time control.
5.2.3 Installation Accessories
A range of decorative surrounds are available to
suit the ePlates.
Masonry mount metal wall box (fire rated) and
Plasterboard Clip mount