LSC Lighting GenVI - Manual (Page 6)

Product Description genVI Dimmer
Operator Manual V1.0
Page 2
1.3 MODELS
The GenVI is available in two models:
 10 amps per channel.
 13 amps per channel.
1.4 FACTORY FITTED OPTIONS
1.4.1 Output Connections
Various output connector options are available. See the “Rear Panel” section below for
details.
1.4.2 100-120VAC Input Power
GenVI can be supplied for 100-120VAC input power operation.
1.4.3 3 Phase Delta Input Power
GenVI can be supplied wired for 3 phase Delta input power operation.
1.5 FRONT PANEL
The front panel contains the DMX input and through connectors, load RCBO’s (Residual
Current Breaker (RCD/GFI) with Overcurrent and Neutral disconnect), SD card slot (used for
software upgrades) and LCD touch screen.
1.6 REAR PANEL
GenVI dimmers can be supplied with the following types of rear mounted load connections:
Australian Sockets
Powercon Sockets
Output channel
number chart
SD Card slot Touch screen RCBO Output Breakers DMX Input
DMX Thru