LSC Lighting GenVI - Manual (Page 23)

GenVI Dimmer Menu System
Operator Manual V1.0
Page 19
.
The “Auto Power” pane has 2 buttons:
 Press Disable to disable the Auto Power function. The button then changes to Enable.
This is a global setting for all channels that have their control source set to “Auto Power”
 Press Hold Time and enter a time from 1 to 60 minutes. This is the time that the “Auto
Power” channels will stay ON when the DMX signal is lost.
3.8.5 View Input
The “DMX Setup” menu allows you to view the channel levels on the DMX input. Press
View Input.
Press either > or > to scroll through all slots in the DMX Universe.
3.9 SYSTEM MENU
Selecting Config, System provides menus for the following functions:
 Code Upgrade.
 Reset.
 Fan Control.
 Service. (Factory use only).