LSC Lighting maXim Quick Reference - Manual (Page 18)

maXim Quick Reference Manual V1.1
Page 14 LSC Lighting Systems (Aust) Pty. Ltd.
7.2.4 Hi-Lights
When a fixture is loaded onto the PaTPad it is automatically Hi-lighted. Only Hi-lighted fixtures
are included when you “store” scenes or when you apply presets or palettes.
Only FLASHING parameters will be included.
To clear the Hi-light of a Fixture;
press
[clear], [F/A] (Fixture Number).
To clear the Hi-lights from all loaded fixtures;
press
[clear], [fixture displayer] .
To Hi-light a fixture;
press
[get], [F/A] (Fixture Number).
To Hi-light all loaded fixtures;
press
[group], [fixture displayer] .
To ONLY Hi-light the fixtures in a group (and clear the Hi-lights of all other fixtures), press;
[group], [F/A] (group number).
To ONLY Hi-light the fixtures in several groups (and clear the Hi-lights of all other fixtures);
press and HOLD
[group], then tap; [F/A] (group number), [F/A] (group number), [F/A] (group
number), etc.
7.2.5 Home
Homing a fixture sets all of its parameters to their home values and sets the parameter times to
their default values.
To set a Fixture to its home position press;
[home], [fixture displayer]
To momentarily send (flash) a Fixture to its home position, press;
[home] [F/A] (Fixture Number).
To send filtered (flashing) parameters to their home positions, press;
[home], [filter].
Only FLASHING parameters will be homed.
To send ALL Fixtures on the PaTPad to their home positions, press;
[home], [all].
To send ALL patched Fixtures to their home positions, clear the PaTPad
[clear], [all], then press; [home], [all].
To send ALL Fixtures that have an intensity level on the output to their home positions, press;
[home], [F/A] (flash yellow master).
7.2.6 Clone
Only flashing parameters will be cloned.
To clone the Fixture on the PaTPad to another Fixture, press;
[clone] [F/A] (destination Fixture Number)
To clone the Fixture on the PaTPad to a Group, press;
[clone] [group] [F/A] (Group Number).