Louroe Electronics DG-12II - Manual (Page 20)

PAGE 17 of 28
POWER CONNECTIONS:
Plug the DG-12 power supply unit to the 3-pin right angle closed Power Header[29]
marked “15 Vdc” located at the rear of the DG-12II unit. Push firmly and make sure that
the locking tables hold the plug-in connector in place. Plug the power supply to a 110 Vac
outlet. Plug the DG-MA AC cord to a 110 Vac outlet II
Fig. 12 Connecting power supply to DG-12II
PUSH IN
&
RELEASE
Black
Green
White
to power source
DG_12II_6/11
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX 994-6458
website: www.louroe.com e-mail: [email protected]
(818) ®
INSTALLATION AND OPERATING INSTRUCTIONS