Canon A3000 IS - Manual (Page 80)

80
Choosing the Person to Focus On
(Face Select)
You can choose a specific person’s face to focus on and then shoot.
1
Enter Face Select mode.
● Point the camera toward the face of the
subject and press the
0 button.
X After [Face Select : On] appears, a face
frame
will appear around the face
detected as the main subject.
● Even if the subject moves, the face frame
will follow the subject within a certain
range.
● If a face is not detected, will not appear.
2
Choose the face on which to
focus.
● If you press the 0 button, the face frame
will move to another face detected by
the camera.
● When the frame has made a full circuit of all
detected faces, [Face Select: Off] will
appear, and the AF frame mode screen will
reappear.
3
Shoot.
● Press the shutter button halfway. The face
frame of the chosen face will change into a
green .
● Press the shutter button fully to shoot.
Confirming the number of detected faces
Keeping the 0 button pressed will display the number of faces detected
by the camera (35 at the most) (orange: main subject’s face, white:
detected face).
CO
PY