Canon A3000 IS - Manual (Page 44)

44
Screen Display
● Switching the Display
You can change the screen display pressing the l button. Refer to
p. 132 for details on information that appears on the screen.
Shooting
Playback
Screen Display in Dark Shooting Conditions
The display automatically brightens when shooting in dark conditions,
allowing you to check the composition (Night Display function). However, the
brightness of the image on the screen, and the brightness of the actual
image recorded may be different. Screen noise may appear and the
movement of the subject may appear somewhat jagged on the screen. This
has no effect on the recorded image.
Overexposure Warning during Playback
In “Detailed Information Display”, overexposed areas of the image flash on
the screen.
You can also switch the display by pressing the l button while the
image displays right after shooting. However, “Simple Information” will
not display. You can change the display that appears first by pressing the
n button to choose the 4 tab, then setting [Review Info].
Information Display No Information Display
No Information
Display
Simple Information
Display
Focus Check
Display (p. 95)
Detailed Information
Display
CO
PY