Leprecon LPC V1 Quick Start guide User Manual
Page 7
7
3.3. Defaults
The Defaults area is used to set standard operating parameters for LPC.
This includes fade times and chase rate, and is applied to newly created items.
3.4. Clear
Clear functions are used to erase selected areas or the entire board memory.
3.5. Park
Board channels or specific DMX dimmer circuits can be set to a specific value for the
duration of a show or programming session. This is called ‘parking’. This can be useful
to turn on work lights, or turn off an improperly focused fixture.
Parked channels levels are not included in cues or submasters that are recorded while
the channels are on.
The interface for Park is shown below:
Channels and dimmers that are parked are shown in a list. Selecting an item from the list
and deleting it will ‘unpark’ the channel or dimmer.
NOTE:
If any channels or dimmers are Parked, a red indicator with the letter ‘P’ is shown on the
title bar at the top of the screen.