Leprecon LPC V1 Quick Start guide User Manual
Page 6
6
3.1. Patch
Dimmer to board channel assignment is set in the patch screen. System default patch
cannot be modified, but can be copied to a new patch.
Patches can be viewed by channel or by dimmer. Proportional patch allows maximum
level to be set for any dimmer circuit.
Applying a patch makes it active, and the dimmer to channel assignment changes at the
time it is applied.
3.2. Settings
The Settings screen sets the following conditions:
Manual mode -
This selects either 2 scene preset or wide mode for the manual faders. This change can
disrupt stage output, so is set as a configuration item.
Work Lamp intensity
This control sets the light level of the gooseneck work lamps.