Leprecon LPC V1 Quick Start guide User Manual
Page 5
5
Connecting to your system
1. Connect monitor to Video port. LPC has fixed 1024 x 768 resolution.
2. Connect USB keyboard and mouse.
3. If an ELO touch screen is being used, connect USB from touch screen monitor.
4. Connect 5 pin DMX data cable to USB line A connector.
5. Connect AC power cord.
6.Turn on power.
2.2. Boot sequence
1.
A
Linux
boot
screen
will
appear,
and
som
e
text
displa
y
showing
the
boot
progress.
This is normal operation.
2.3. Power -off
To turn off the LPC:
1.Click on the X in the upper right corner of the screen. A dialog box will appear asking
‘are you sure?’
2. Confirm the shutdown dialog box by clicking or touching ‘yes’.
3. After
about
30
seconds,
turn
off
the
power
s
witch.
3. Setup
The main setup screen shows the current software versions, and contains submenus for all
setup functions.
Three software components comprise the LPC system, and the revision level and release
date for each of the components is shown in the main Setup screen.
The LPC title bar at the top of each screen also shows an elapsed time stopwatch.
Clicking on the clock face will start, pause or reset the elapsed time display.