Leprecon LPC V1 Quick Start guide - Manual (Page 3)

3
1. Specifications
The following specifications may be changed at any time without notice. Future software
upgrades may affect these system specs.
1.1. Channel capacity
The LPC-48V manages up to 204 control channels.
1.2. DMX dimmers
512 DMX channels. Industry standard 5 pin XLR connectors are used.
1.3. Power Supply
LPC uses an internal power supply, operating over a voltage range of 85 to 260 VAC. No
separate power adapter is used. Line cord connection is IEC C12.
1.4. Peripherals
LPC can be used with standard USB mouse and keyboard.
A standard VGA monitor and USB mouse are needed for operation. Monitor resolution
1024 x 768.
ELO touchscreen monitors are supported by LPC, allowing easy touch control instead of
using a mouse. Touch calibration is matched to the ELO1529 series only. Larger
monitors can be used for display, but the touch control will not be calibrated.
1.5. Show Storage
All show data is stored on internal flash. Internal show can be backed up to USB flash
memory.