Lencore n.Form: Installation and Operations Manual - Manual (Page 28)

section 3
3.9 | head end equipment installation
HEAD END EQUIPMENT LIST:
•
i.LON®
•
Music and Paging Interface (MPI-6)
•
SmartSwitch
•
Jordna Hub
•
FT Terminator
•
Mic Pre-Amp (Optional Equipment)
•
320 watt, 48V Power supply
•
For SmartSwitch and first Emerald OP
•
For Mic Pre-Amp (optional)
Electrical Requirements:
One dedicated 120v/20 Amp circuit is suggested for the Lencore branded enclosure
Installing Head End Equipment (Din Rail and i.LON) (This may already be pre-wired) 2
1
WARNING
NOTE: Never use a ground lifter. Always use a proper three prong adapter for safety.
a
25