Push stick – Delta 36-714 User Manual
Page 30
30
When ripping work less than 6 inches wide, a push stick should be used to complete the feed and
could easily be made from scrap material by following the pattern shown in Fig. S25.
Fig. S25
PUSH STICK
MAKE FROM
1/2
" OR
3/4
"
WOOD OR THICKNESS
LESS THAN WIDTH OF
MA
TERIAL
TO BE CUT
CUT OFF HERE TO
PUSH 1/4
" WOOD
CUT OFF HERE TO
PUSH 1/2
" WOOD
NOTCH TO HELP
PREVENT HAND
FROM SLIPPING
1/2
" SQUARES
CONSTRUCTING A PUSH STICK