Connections, controls, and indicators – LD Systems ZONE 423 User Manual
Page 10
connectionS,
ConTRoLS, AnD InDICAToRS:
44
InPUT 4 FoH L/R
Balanced stereo line input with 6.3mm jacks (left /
right). Connection option for a source device (e.g.
mixer).
45
InPUT 4 CD L/R
Unbalanced stereo line input on RCA connectors
(left / right).
46
enABLe FoH
When the switch is pressed, the FOH INPUT 44 is
activated, when the switch is not pressed the CD
input 45 is activated.
47
InPUT 4 LIne L/R
Unbalanced stereo line input on RCA connectors
(left / right).
48
InPUT 2 - 3 PHono / LIne L/R
Unbalanced stereo input on RCA connectors (left /
right). The pressed switch 49 activates an equalizer
/ preamplifier for the use of a turntable. If this
switch is not pressed, a playback device can be
used with line level.
49
InPUT 2 - 3 PHono / LIne SWITCH
Switch to activate the phono equalizer / preamplifier.
50
InPUT 2 - 3 CD L/R
Unbalanced stereo line input on RCA connectors
(left / right).
51
InPUT 1 LIne L/R
Unbalanced stereo line input on RCA connectors
(left / right).
52
MIC InPUT 1 - 2
Balanced microphone inputs INPUT 1 and 2 with
6.3 mm jack. Both microphone inputs are equipped
with a 12 V phantom power.
53
T/o LeVeL
The threshold value of the Talkover is determined
using the T/O LEVEL control (sensitivity with which the
Talkover feature reacts to the incoming microphone
signal). The Talkover feature is available for the
MASTER and ZONE line outputs (SOURCE switch
set to MIX).
10
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ES
pA
ño
L
po
LSKI
IT
ALIAN
o
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43