K-Patents FC-11 - Manual (Page 9)

2 Connecting to the refractometer system 5
© Copyright K-Patents 2014. All rights reserved.
2.2 Connecting to a Divert Unit / a DD-23 system
Connect the FC-11 with a standard ethernet cable to the ethernet output connector in the DD-23
Divert Unit. Note: Some of the FC-11 features are not accessible when it is connected to a Divert
Unit.
2.3 Connecting to a PR-33-S sensor
With stand-alone installations, connect the Field Communicator with a standard ethernet cable
to the PoE switch that powers the sensor(s). If your sensor(s) are in a factory network, connect
to the network with a standard ethernet cable.
2.4 Connecting to a PR-33-AC sensor
The connection is made over ethernet with the PR-8330-001 cable for the PR-33-AC sensor. If
you want to keep the PR-33-AC connected to another device or network, the connection can also
be made to a network hub/switch with a standard RJ-45 Ethernet cable.
DIAGNOSTI
CS MEA
SURMENT
TOOLS
DATA LOGGING
SETTI
NGS
MA
IN MEN
U
nD 1.37924
NORM
AL OPERA
TIO N 27 .36°C
23.
15
172.16.23.108
PR-33- AC
R09690
x
SETTINGS
DEVICE INFO
TOOLS
DIAGNOSTICS
MEASUREMENT
A
172.16.23.182 95%
nD 1.3818
NO RM AL OPER ATIO N 2 7.5°C
MAIN MENU
?
Figure 2.2 Connecting to a PR-33-AC sensor
2.5 Connecting to a computer via USB
When connected to a computer with a standard USB to micro-USB cable, the FC-11 field commu-
nicator becomes visible as an external hard disk. It works with most commonly used operating