KIP Multi-Touch - Manual (Page 64)

KIP Multi-Touch User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2015 KIP. v1
- 64 -
Step Action Illustration
12. Restart SYSK – Selecting this
button will Reboot the KIP System
KCS controller (powering down
the printer not necessary).
13. IPV4 Setup – Used to set up the
IPV4 IP address.
• Automatic Setup – Used
when DHCP is present on
site.
• Manual Setup – Use to set
a static IP Address.
14. IPV6 Setup - Used to set up the
IPV6 IP address.
• Automatic Setup – Used
when DHCP is present on
site.
• Manual Setup – Use to set
a static IP Address.