Kiddy Click'n move 3 - Manual (Page 28)

EN
28 28
6. Utilization of Kiddy click’n Move 3 with infant carrier
6.1 Attaching/removing the infant carrier adaptors
WArnInG
Ensure that the parking brake is activated after
unfolding the chassis as described in point 3.1.
Insert both plugs of the infant carrier adapter on the left and right support on the
chassis until they lock into the place and sit tight (fig. 40; no. 1) and the indication
at locking button is “green” (fig. 40; no. 2).
WArnInG
Before installing of infant carrier seat make sure
that both locking buttons indicate “green”. When
the locking buttons indicate “red”, pull these up-
wards, so that “green” will be indicated. test by
pulling upwards whether the are locked in place
and tightly connected to the the chassis.
To remove the infant carrier adapters from the chassis press both locking buttons
downwards so that these indicate “red” (fig. 41; no. 1) and pull the adapters up-
wards (fig. 41; no. 2).
6.2 Attaching/removing the infant carrier
WArnInG
Make sure that your child is secured in the infant
carrier like described in it’s operating manual.