Kiddy Click'n move 3 - Manual (Page 19)

EN
19
WArnInG
Ensure that both locking buttons are engaged
after the adjustment.
4.4 Adjustment of the reclined/upright position
Pull the handle on backside of the backrest to release the locking mechanism
(fig. 16; no. 1) and turn the pushchair seat in the desired position (a, b, c , fig. 16;
no. 2).
WArnInG
Ensure that the reclining mechanism is engaged
after losing of the handle.
4.5 Opening/ Closing the bumper bar
To open the bumper bar, press one of the release buttons (fig. 17; no. 1) and tip
the bumper bar to the side (fig. 17; no. 2).
To close the bumper bar, plug in the locking button back into the support on the
pushchair seat.
WArnInG
Make sure by a pulling test that the bumper bar
is always closed correctly when seat unit is in
use.
WArnInG
never use the pushchair seat without bumper
bar.
19