Kiddy Click'n move 3 - Manual (Page 15)

EN
15
WArnInG
Ensure that both locking devices of the chassis
are engaged before use.
3.2 Folding the chassis
Keep the releasing button under the right side of the handle pressed (fig. 3; no.
1) and pull both releasing sliders backwards (fig. 3; no. 2) and simultaneously the
handle bar downwards (fig. 3; no. 3).
Now pull the hand-grip (fig. 4; no. 1) with your left hand and push the handle bar
(fig. 4; no. 2) until the locking button clicks in position.
WArnInG
take care that you don’t entrap extremities in
moveable parts.
WArnInG
the chassis is completely flat foldable , when the
push chair seat is mounted in driving direction.
3.3 Attaching/removing the rear wheels
To mount a rear wheel keep the locking button pressed (fig 5; no. 1) and push the
axle in the hub of the chassis (fig 5; no. 2).
WArnInG
test whether both rear wheels are locked in
place and tightly connected to the chassis by
pulling them to the outside.
15