Kiddy Click'n move 3 - Manual (Page 16)

EN
16
To remove a rear wheel, keep the locking button pressed (fig. 6; no. 1) and pull the
wheel outwards (fig. 6; no. 2).
3.4 Attaching/removing the front wheels
To mount a front wheel keep the locking button pressed (fig. 7; no. 1) push the
vertical axle in the holding bracket of the chassis (fig. 7; no. 2).
WArnInG
test whether both front wheels are locked in
place and tightly connected to the chassis by
pulling them downwards.
To remove a front wheel, keep the locking button pressed (fig. 8; no. 1) and pull
the wheel downwards (fig. 8; no. 2)
3.5 Locking/releasing the swivel front wheels
To lock the front wheels, they must be turned in the straight-forward position.
Then push the fixing lever upwards (fig. 9; no. 1) until the button locks in place.
To release the wheels for free swivel, push the fixing lever downwards
(fig. 9; no. 2).
3.6 Adjustment of the parking brake
Press the pedal backwards down to activate the brakes (fig. 10, “STOP”).
WArnInG
Don‘t let go of the stroller until you are sure that
the parking brake is fully engaged.
16