Kiddy Click'n move 3 - Manual (Page 17)

EN
17
To release the brakes, press the pedal frontwards (fig. 10, “GO”).
3.7 Adjustment of the handle bar
Keep both release buttons pressed (fig. 11; no. 1) and then turn the handle bar in
the desired position (fig. 11; no. 2).
4. Utilization of Kiddy Click’n move 3 with pushchair seat
4.1 Attaching/removing the pushchair seat at/from Chassis
WArnInG
the pushchair seat is intended for children from
6 months (appr. 20 lbs/9 kg) up to 4 years (max.
55 lbs/25 kg).
WArnInG
this seat unit is not suitable for children under
6 months.
WArnInG
Ensure that the parking brake is activated after
unfolding the chassis as described in point 3.1.
If infant carrier adapters were used, they must be removed from the chassis. The
pushchair seat can be used front or rear facing the driving direction.
17