beautypg.com

Capacity plus, Linked capacity plus, Capacity plus linked capacity plus – Motorola DP 2400 User Manual

Page 21: See linked capacity plus

background image

English

13

A Members roam list supports a maximum of 16 channels
(including the Selected Channel).

You cannot manually add or delete an entry to the Members
roam list. A Software License Key sold separately is required to
use this feature.

Check with your dealer or system administrator for more
information.

Capacity Plus

Capacity Plus is a single-site trunking configuration of the
MOTOTRBO radio system, which uses a pool of channels to
support hundreds of users and up to 254 Groups. This feature
allows your radio to efficiently utilize the available number of
programmed channels while in Repeater Mode.

You can only access channel(s) with Capacity Plus via the
Channel Selector Knob, while features supported in Capacity
Plus can be accessed via a programmable button press.

You will hear a negative indicator tone if you access a feature
not applicable to Capacity Plus via a programmable button
press.

Your radio also has features that are available in both
conventional digital mode and Capacity Plus. However, the
minor differences in the way each feature works does NOT
affect the performance of your radio.A Software License Key
sold separately is required to use this feature.

Check with your dealer or system administrator for more
information on this system.

Linked Capacity Plus

Linked Capacity Plus is a multi-site multi-channel trunking
configuration of the MOTOTRBO radio system, combining the
best of both Capacity Plus and IP Site Connect configurations.

Linked Capacity Plus allows your radio to extend trunking
communication beyond the reach of a single site, by connecting
to different available sites which are connected via an Internet
Protocol (IP) network. It also provides an increase in capacity by
efficiently utilizing the combined available number of
programmed channels supported by each of the available sites.

When the radio moves out of range from one site and into the
range of another, it connects to the new site's repeater to send
or receive calls/data transmissions. Depending on your settings,
this is done automatically or manually.

If the radio is set to do this automatically, it scans through all
available sites when the signal from the current site is weak or
when the radio is unable to detect any signal from the current
site. It then locks on to the repeater with the strongest Received
Signal Strength Indicator (RSSI) value.

In a manual site search, the radio searches for the next site in
the roam list that is currently in range (but which may not have
the strongest signal) and locks on to it.

NDP_ANZ-EMEA.book Page 13 Thursday, July 19, 2012 8:22 AM