Motorola DP 2400 - Manual (Page 17)

English
9
Programmable Buttons
Your dealer can program the programmable buttons as
shortcuts to radio functions or preset channels/groups
depending on the duration of a button press:
• Short press – Pressing and releasing rapidly.
• Long press – Pressing and holding for the programmed
duration.
• Hold down – Keeping the button pressed.
NOTE: The programmed duration of a button press is
applicable for all assignable radio/utility functions or
settings. See Emergency Operation on page 32 for
more information on the programmed duration of the
Emergency button.
Assignable Radio Functions
Call Forwarding – Toggles Call Forwarding on or off.
Voice Announcement for Channel – Plays zone and channel
announcement voice messages for the current channel. This
function is unavailable when Voice Announcement is disabled.
Emergency – Depending on the programming, initiates or
cancels an emergency alarm or call.
Intelligent Audio On/Off – Toggles Intelligent Audio on or off.
Manual Site Roam* ‡ – Starts the manual site search.
Mic AGC On/Off – Toggles the internal microphone automatic
gain control (AGC) on or off.
Monitor – Monitors a selected channel for activity.
Nuisance Channel Delete* ‡ – Temporarily removes an
unwanted channel, except for the Selected Channel, from the
scan list. The Selected Channel refers to the user’s selected
zone/channel combination from which scan is initiated.
Notifications – Provides direct access to the Notifications List.
One Touch Access – Directly initiates a predefined
Private, Phone or Group Call, a Call Alert.
Permanent Monitor* ‡ – Monitors a selected channel for all
radio traffic until function is disabled.
Privacy – Toggles privacy on or off.
Phone – Provides direct access to the Phone Contacts list.
Phone Exit – Ends the current Phone Call.
Repeater/Talkaround* ‡ – Toggles between using a repeater
and communicating directly with another radio.
* Not applicable in Capacity Plus
‡ Not applicable in Linked Capacity Plus
NDP_ANZ-EMEA.book Page 9 Thursday, July 19, 2012 8:22 AM