Kleenmaid KFL850 - Manual (Page 26)

* UKS: universal stability control - this function prevents excessive vibrations during spinning.
In case you were not successful in repairing the
malfunctions in spite of the above troubleshooting
chart call your nearest authorised service centre
on 1300 652 100. Service calls resulting from any
failure arising due to customer error or not checking
the troubleshooting chart are not covered by
warranty and any repair expenses are to be paid by
the customer.
26 27
Failure Possible cause Remedy
Greasy wads appear
on the laundry.
Too little detergent (laundry was
very greasy).
Wash the laundry again.
Add more detergent for such soiled
laundry, or use liquid detergent.
Laundry is stained
after washing.
You used liquid detergent or
detergent for coloured laundry
which does not contain whitener.
Use the detergent containing
whitener.
White powdery
residues on the
laundry.
It is not the consequence of bad
rinsing, but because of neo-
phosphate detergents containing
non soluble components
(zeolites) for water softening.
Such substances may be
deposited upon the laundry.
Immediately rinse the laundry once
again.
• Use liquid detergents which do not
contain zeolites.
• Try removing the residues with the
brush.
Detergent residues in
the dispenser.
Low water flow pressure.
Some detergents may stick to
the dispenser. Clean dispenser
regularly.
• Clean the inlet hose filter.
• In case of low water pressure
increase water level.
• Wipe the dispenser prior loading
detergent.
Softener is not
completely rinsed,
or water is left in the
dispenser dish.
Cover is not correctly positioned
or is clogged.
Clean the dispenser and firmly fix the
cover in place.
Washing time is
longer than usual.
• The UKS* function has been
activated because of uneven
laundry load.
• Power failure has occurred.
• Washing program time may be
prolonged for 10 minutes and the
machine still functions perfectly.
• Time is prolonged for the power
failure period.