Kleenmaid KFL850 - Manual (Page 17)

•
By the user
Selecting RINSE HOLD function
Program is stopped when it comes to the RINSE
HOLD stage (drum door remains closed all the
time). Indicator LED above the knob (E) starts
flashing. Washing procedure is continued by
pressing the START knob (F).
Own (physical) interruption
You may stop the program by turning the program
selector to the position “0”. If there is water in the
drum select one of additional programs (drain, spin)
to empty the water and terminate the program.
PAUSE knob
By pressing the PAUSE knob (F) program may
be suspended at any time. After certain time you
may open the door if there is no water in the drum,
otherwise this is not possible. Program is continued
by pressing the START knob (F).
•
Failures
Program is suspended in case a failure occurs.
Signal LED’s are flashing and sound signal is
heard (see Failures page 24).
•
Power failure
If a power failure occurs the washing program is
interrupted, and when the power is restored. The
program is automatically resumed where it was
interrupted.
If a power failure occurs when the drum is
still full of water, be careful not to open the
door before you pump the water out.
16 17
Interruptions