Kleenmaid KFL850 - Manual (Page 11)

- Open the door of the machine.
Door is opened by pulling the handle (lever) on
the right hand side of the door towards you.
•
Sort the laundry by the type of fabrics.
•
Load the laundry into the drum.
•
Close the door.
•
Open the water inlet tap.
•
Push the ON/OFF button and select the program.
•
Add washing and treatment agents (detergent and
softener).
•
Start the operation by pushing the START knob (F).
Do up buttons and zippers, tie strings and
pull out pockets.
Very delicate laundry should be put in a
special protective laundry bag.
It is suggested to load the drum with items
of different sizes.
Pay attention to the labels on clothes
which indicate the recommended washing
mode (see table of textile treatment
symbols on the last page of these
instructions).
Program is selected by turning the program selector
(A) from the “0” position to the desired washing
program. The ON/OFF signal LED indicating
particular washing stage for the chosen program
starts flashing. The program selector (A) may
be turned in both directions, and the appropriate
program selected according to the type of laundry
washed and the required washing temperature (see
Program Chart for help). You may select basic or
partial programs.
Select additional functions by pressing their relevant
knobs.
10 11
Washing machine
operation
Washing procedure