Kleenmaid KFL850 - Manual (Page 13)

Mix
Special program for washing normally stained
coloured laundry made from various resistant fabrics
at 30°C.
- Selection of additional function
( , , , )
Additional functions alter the basic washing cycle
procedure. Particular function is switched on
by pressing the relevant knob. The selection is
confirmed with sound signal and switching on the
signal LED above the selected function. If certain
function is not available for the selected program,
signal LED will not illuminate.
The function is switched off by pressing the same
button again - signal LED goes off.
Select the particular function after the
selection of the basic program, but prior
pressing the START button (F).
Rinse hold (E)
•
This function is switched on after the selection of
a basic program by pressing the knob (E). It may
also be switched on during the operation, prior to
the last rinse. Indicator LED above the washing
cycle symbol is lit.
•
The program stops at the end of last rinse, prior
to spinning: laundry remains soaked in water and
prevents creases, if you are unable to remove
laundry from the drum immediately after the end
of the washing cycle.
•
Indicator LED above the knob is flashing.
•
The selected program is completed by pushing
the START button (F), but you may also apply
partial programs (pumping or spinning), but you
must first return the program selector (A) to the “0”
position for at least one second, prior to selecting
any of the partial programs.
•
When program continues, indicator LED above
12 13