Kleenmaid TO701 User Manual
Page 25
3.
S
tarting pyrolysis straightway
25
e o v e n c a v i t y
Before embarking on pyrolytic cleaning, make sure there are no cooking
trays or containers in the oven and the two telescopic sliding systems
have been removed and you have wiped up any large splashes or drips.
• Check that the time of day is glowing steadily
in the display panel (not blinking).
• Turn the
function selector to PYRO or
PYRO ECO.
The time for the pyrolysis to work is 2 hours
(PYRO ECO) or 2½ (PYRO). This includes the
cooling-down time until the door is unlocked.
The display will show you when you can use
your oven again.
When it shows
on the display, the pyrolytic
cycle (or the energy-saving pyrolytic cycle) is working.
During the cycle, a padlock appears on the
display to remind you the door is locked.
At the end of the cycle the display
shows..........................................................>
When the disappears you can open the door.
• Move the
function selector back to 0.
• When the oven is completely cold use a damp
cloth to remove the white ash
. The oven will
once more be ready for you to cook in.
99629211_GB_A.qxd 16/06/03 10:27 Page 25