Kleenmaid TO701 - Manual (Page 16)

16
How to use your oven
a) T o delay cooking
• Choose the method of cooking and adjust the
temperature if necessary.
The example is " "
Temperature 200°C
• Turn the programme selector to “ ”
The cooking time display shows 0:00 and blinks.
You can now set how long to cook for.
• Turn the knob until the time is displayed.
E.g. 25 minutes
The oven will automatically assume this time is
correct after a few seconds
-> The display will stop blinking.
Immediately the display stops blinking the
countdown starts.
The time cooking will finish (start time + cooking
time) is shown in the display panel.
For this example:
cooking will end at 12:55 pm
After this, the oven heats up,
the temperature increase indicator is busy and reflects how hot
the oven is. When the oven has reached the right temperature, it will
sound 3 beeps.
At the end of the cooking time, the oven gives a series of beeps for some
minutes. To switch the beeps off, turn the programme selector to TºC and
the function selector to "0".
T˚ c
4.
H
ow to programme the cooking
99629211_GB_A.qxd 16/06/03 10:27 Page 16