Kleenmaid BBQ3BF - Manual (Page 25)

Kleenmaid Professional - Outdoor Cooking Centres 25
Stainless Steel Cart Assembly Instructions
12. Doors and Center Panel
Fit the front infill panel into place using the M6x10
screws, M6 nuts and M6 washers provided (two on the
bottom and two on the top of the infill panel). Do not
fully tighten until the doors are in place to allow for
final adjustment.
The doors are factory assembled. Locate the pre-fitted
hinge pins at the bottom of the doorframes in the
corresponding holes on the trolley baseplate
13. External Storage Basket
The external storage baskets can be mounted on
either side of the barbecue. The baskets can be
mounted by Locating the hooks at the top of the
baskets into the corresponding holes on the parallel
mounting holes which are located on the trolley side
panels.
13A. Internal Condiment Racks
The internal storage baskets can be mounted on
either side of the trolley doors. There are two sets
of optional locating holes on each door. The holes
are keyed to accept the ends of the rods on the
condiment racks. See diagram 12A.
14. Gas Cylinder Location
If your barbecue is configured for Propane gas (LPG),
the gas cylinder can be mounted on the trolley using
the cylinder hook, or inside the cabinet. If you wish to
place the cylinder outside the cabinet, use the cylinder
hook which fits into the slot at the side of the trolley
side panel. See diagram 14.
13
13A
14
External Storage Baskets
Internal Condiment Racks