Kleenmaid BBQ3BF - Manual (Page 14)

14 Kleenmaid Professional - Outdoor Cooking Centres
Side Burner Assembly Instructions
Attachment To The Stainless Steel Cart
1. When fitting the side burner ensure that the
barbecue is installed in the trolley first.
2. Remove the four nuts and bolts holding the
barbecue a trolley frame together.
3. Align the four holes in side burner with holes in
trolley side panel and pass the bolts through. Head
of screws should be on the outside.
4. Fit washers and nuts, then tighten.
Attachment To Pedestal Trolley
1. Remove the shelf from the right hand side of your
existing barbecue trolley (if you have no shelf just
remove the four bolts, nuts and washers from the
right hand side of your barbecue).
2. Using the four bolts, nuts and washers just
removed, bolt the side burner to the side of the
barbecue.
3. Fasten the longer end plate to the side burner
using the three black buttons in the bolt pack. The
shorter end plate may be discarded.
5. The remaining fasteners in the bolt pack are not
required for this application and may be discarded.