Kleenmaid FE904C - Manual (Page 49)

CABINET INSTALLATION INSTRUCTIONS
6. CABINET INSTALLATION INSTRUCTIONS
Your safety and the proper care of your appliance is extremely important. Incorrect installation of the
appliance as a result of not following the detailed specifications can affect the appliances performance.
Ovens incorrectly installed may invalidate the warranty and we strongly recommend that the oven cavity,
venting, wiring and gas connections be prepared as described in the specifications. This is critical to
appearance, oven performance and safety.
WARNING: Installation must comply with Standards Australia (within Australia) Wiring Rules as well as your local electrical
and building codes and regulations and any other applicable requirements.
Your appliance must be properly installed and grounded by a qualified technician.
This appliance must be installed according to the installation requirements of the local gas authority and the
appropriate installation code issued by the A.L.P.G.A and A.G.A (reference code AG601) and the building
authorities requirements and any other applicable requirements.
6.1 Measurements
Unless otherwise noted, all dimensions provided are in millimetres (mm). The sizes allow for only a small degree
of error so all cut outs must be precise and square. To ensure the cabinetry is well finished the cut edges must
also be square and care taken to ensure the cut edges are free of chips.
6.2 Preparing the Cupboard Cavity
Freestanding ranges may be fitted within cupboard surrounds or at the end of a cabinet arrangement.
Refer to the installation diagrams and Required Clearances for the various mounting options and necessary
clearances applicable.
47