Kleenmaid FE904C User Manual
Page 47
CLEANING & MAINTENANCE
5.8 TROUBLE SHOOTING GUIDE
SYMPTOM
REMEDY
No power supplied to appliance
Has the mains been disconnected. Check meter box,
has the mains fuse or circuit breaker blown or tripped.
Oven power is on but appliance
Oven may be set on Automatic
does not operate.
(See Automatic Programmed Cooking)
Oven power is on but there
Oven may be set on Automatic.
is no heat
Mode may be on incorrect selection.
Rubber seal has gap/s at bottom and ends
Correct — some doors sealed this
do not meet.
way for oven venting purposes.
Display is flashing, is only partly illuminated or is
Turn power supply to appliance off,
cycling through various displays
wait 30 seconds and turn power back on. Wait 90
seconds before resetting clock and using appliance.
IF YOU HAVE A PROBLEM WITH YOUR ST GEORGE APPLIANCE WHICH CANNOT BE OVERCOME USING THE
INFORMATION PROVIDED IN THIS MANUAL AND REQUIRE A SERVICE CHECK, PLEASE CONTACT THE RELEVANT
OFFICE IN YOUR STATE — for contact details see over.
To ensure prompt and efficient service please have the following details ready before making your call:–
Model Number
Date and Place of Purchase
Serial Number
Warranty Registration Number (if applicable)
45