Alcatel Pixi 4 4017 D - Manual (Page 11)

19 20
1.2 Getting started
1.2.1 Set up
Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Power off your phone
before inserting or removing the SIM card.
SIM1 SIM1
Place the SIM card with the chip facing downwards and slide it into its housing.
Make sure that it is correctly inserted. To remove the card, press and slide it
out.
2SIM (1)
Release the SIM card holder by sliding it in the direction of the arrow and lift
it. Insert the SIM card with the gold contacts facing down and make sure the
SIM card is put flatly. Lower the SIM card holder and slide it in the opposite
direction to lock it.
(1) 4017D only.
For dual SIM models, both SIM1 and SIM2 can support 2G and 3G
networks. If both of them are 3G SIM cards, only one card can support
3G network (1) . Your phone only supports micro-SIM card. Do not attempt
to insert other SIM types like mini and nano cards, otherwise you may
damage your phone.
Installing or removing the battery
Power off your phone before removing the battery.
• Insert and click the battery into place, then close the cover.
• Unclip the cover, then remove the battery.
Installing or removing the microSD card
To install, insert the microSD card first, and then place it into the slot with the
gold contact facing down. To remove the external microSD card, slide and take
it out from the slot.
(1) 4017D only.