Kemppi DC 3500W - Manual (Page 17)

9901 / 1916110E / 17
English
kuvat 49 - 52
4. Select the second digit from the knob (e.g. 3) and
again accept it by pressing the key (REMOTE /
CODE LOCK/ENTER).
5. Select the third digit in the same way (e.g.2).
Now the code locking is on with the number that
you have chosen (e.g. 432).
Turning the machine on when the code lock-
ing is on
When you turn on a machine in which the code locking
is on, you must always feed in the opening code that
you have installed in order to be able to use the ma-
chine.
1. Feed in the first digit from the current adjustment
knob.
2. Accept the digit by pressing (REMOTE / CODE
LOCK/ENTER).
3. Feed in the second and third digits in the same
way.
The machine is ready for use.
If you enter wrong code, you can try again by
turning the machine off and on. If you can not
open the machine, you do not remember the right
code, contact an authorized service agent.
Removal of code locking
1. Press the key for pre-gas (CODE LOCK) and the
key for remote control (REMOTE / CODE LOCK/
ENTER) at the same time.
2. Feed in the digits of the code in the same way as
when opening the machine. The code locking will
be removed after you have fed in the last digit.
3. Turn the machine off. The machine is now ready
for use.
Changing the code
1. Remove the code locking in accordance with the
above instruction.
2. Install the code locking again.