Kemppi Promig 200 - Manual (Page 3)

PROMIG 200, PROMIG 300 / 0537 – 3 © KEMPPI OY
Promig 200 and Promig 300 are mobile wire feeders designed for dock yards and heavy metal
industry. PRO multi function power sources are used as power soures for Promig wire feeders.
Due to operational properties and mechanical durability of wire feeders, Promig 200 and 300
units are very suitable for flux-cored wire welding with long intermediate cables. Operations
of wire feed unit are controlled and adjusted with a microprocessor and a tacho generator of
wire feed speed. Promig 200 and 300 are based on same technical basic solutions, the units
are different from each other in the first place in respect of size or filler wire reel. Promig 200
is designed to be used with filler wire reel of max 200 mm (5kg), whereas Promig 300 is for
reels of max 300 mm (20 kg).
These operation instructions handle Promig 200 and Promig 300 wire feed units, assembly,
installation and operation functions of MIG-system.
This equipment’s electromagnetic compatibility (EMC) is designed for use in an indust-
rial environment. Class A equipment is not intended for use in residential location where
the electrical power is provided by the public low-voltage supply system.
1.2.1. Main functions
Main switch
Adjustment of welding voltage (MIG/MAG) and current (MMA)
Adjustment of wire feed speed
Selection of welding method MIG/MAG / MMA
Regulator/meter for shielding gas flow
Control of shielding gas
1. PREFACE
1.1. INTRODUCTION
Congratulations on having purchased this product. Properly installed Kemppi products should
prove to be productive machines requiring maintenance at only regular intervals. This manual
is arranged to give you a good understanding of the equipment and its safe operation. It also
contains maintenance information and technical specifications. Read this manual from front to
back before installing, operating or maintaining the equipment for the first time. For further
information on Kemppi products please contact us or your nearest Kemppi distributor.
The specifications and designs presented in this manual are subject to change without prior
notice.
In this document, for danger to life or injury the following symbol is used:
Read the warning texts carefully and follow the instructions. Please also study the Operation
safety instructions and respect them when installing, operating and servicing the machine.
1.2. PRODUCT INTRODUCTION