beautypg.com

2 cable connections – Kemppi RA User Manual

Page 9

background image

EN

3.2 Cable connections

Connection to the mains

Kempact RA models are available in either 1-phase 230 V, 3-phase 400 V, or multi-voltage

units. Machines supplied with a mains power cable are not equipped with a plug, so you must

select and fit a suitable mains plug before you use the machine for the first time.
Check that the mains cable complies with the local electrical regulations and replace the cable

if necessary. See ’Technical data’.

NOTE!

The mains cable or mains plug may be installed or replaced only by an electrical contractor

or installer authorised to perform such operations.

Welding gun
Kempact RA welding machines are supplied with Kemppi FE range welding guns as standard.

These guns are designed for industrial applications and if used and maintained correctly will

provide productive and reliable service.

NOTE!

Make sure that you select appropriate feed rolls/groove size, welding gun contact tip and

gun liner. If using aluminium or stainless steel filler wire, we recommend you change the wire liner

to a Kemppi DL-Chili liner.

7

© Kemppi Oy / 1336