Kemppi GT02S - Manual (Page 9)

EN
Filler wire support liners
ø, mm m Order number
Fe, Mc, Fc 0.8 – 1.6 10.5 W004214
15.5 W004216
20.5 W004217
25.5 W004218
Ss, Al, Fe, Mc, Fc 0.8 – 1.6 10 W004145
15 W004219
20 W004220
25 W004221
SuperSnake wire feed mechanism
Before loading the filler wire to SuperSnake please set the wire feed mechanism. Ensure the
grooved drive rolls suit the filler wire size and type. Close and adjust the pressure arm.
Feed rolls and quide tubes
ø, mm Order number
1. kit
2.
Fe, Ss, Al 0.8/0.9 W004276 1.
0.8/0.9 W004077 2.
1.0 W004277 1.
1.0 W004072 2.
1.2 W004278 1.
1.2 W002502 2.
1.6 W004279 1.
1.6 W004080 2.
Fe, Fc, Mc 1.2 W004281 1.
1.2 W004160 2.
Fe, Fc, Mc, Ss, Al 1.2 W004280 1.
1.2 W004161 2.
Fe, Mc, Fc 0.8 – 1.6 W004083
Ss, Al, Fe, Mc, Fc 0.8 – 1.6 W004185
7
SuperSnake GT02S, GT02SW / © Kemppi O
y / 1110