Assembly of supersnake gt02s and gt02sw – Kemppi GT02S User Manual
Page 8
EN
2.3.2 gas cooled system
Fastmig pulse + mXF
1.
4.
5.
7.
6.
9.
2.
3.
8.
1.
MXF or ProMig wire feed unit
2.
FastMig Pulse or Pro Evolution power source
3.
Gas supply
4.
MMA electrode holder
5.
Remote control device
6.
SuperSnake GT02S
7.
Air cooled welding Gun
8.
Power cable
9.
Earth return lead and clamp
3.
aSSembly OF SuperSnake gt02S and gt02Sw
3.1
beFOre COnneCtiOn
Uncoil SuperSnake taking the feed mechanism body towards the intended welding area, and
away from the welding machine. Ensure there are no tight bends before you load the filler
wire.
Ensure that the correct filler wire support liner is fitted and installed correctly for the intended
welding application. Kemppi manufacturer a range of support liners for different filler material
types, including Steel wound and DL Teflon. Please read the guide notes on liner selection and
installation before use.
6
SuperSnake GT02S, GT02SW / © Kemppi O
y / 1110