Kemppi GT02S User Manual
Page 13
EN
Connecting the welding gun
Prepare your welding gun for connection. SuperSnake is designed to accept a wide variety of
welding guns fitted with the standard Euro fitting. To ensure reliable welding performance,
please ensure the gun is suitable for the intended welding application and is in good working
order, correctly fitted with a suitable liner and contact tip.
Tread the filler wire into the welding gun and connect to the SuperSnake. Hand tighten the
gun collar.
NOTE!
Kemppi manufacture a range of quality welding guns, low friction loss gun liners and gun
consumables, designed to compliment our welding products. Please consider these products
before selecting an alternative.
welding power controls
Ensure Remote control function is selected on the wire feed unit. SuperSnake provides
wire feed speed and voltage control in Basic MIG/MAG mode, plus Power and Arc length in
1-MIG and Pulse MIG. Note that Pulse MIG is not available in ProMig applications. Convenient
welding parameter adjustments can be made during welding, allowing easy fine tuning of the
welding arc.
1.
1.
Welding power adjustment
11
SuperSnake GT02S, GT02SW / © Kemppi O
y / 1110