Kemppi GT02S User Manual
Page 7
EN
2.3
COnneCting CableS
NOTE!
Always check before use that the interconnecting cable, shielding gas hose, earth return
lead/clamp, and mains cable is in a serviceable condition. Ensure that connectors are correctly
fastened. Lose connectors can impair welding performance and damage connectors.
Sub feeder syncronization kit
To enable SuperSnake connection, MXF wire feed units must first be fitted with a FastMig MXF
synchronisation kit (W004030), and ProMig wire feed units with ProSync 50 kit (6263121).
Follow the installation instructions provided in the kit delivery.
2.3.1 water cooled system
Fastmig pulse + mXF + FastCool 10
pro evolution + promig + proCool 30
1.
4.
9.
2.
3.
10.
5.
6.
8.
7.
1.
MXF or ProMig wire feed unit
2.
FastMig Pulse or Pro Evolution power source
3.
FastCool or ProCool 30 water cooler and power connection
4.
Gas supply
5.
MMA electrode holder
6.
Remote control device
7.
SuperSnake GT02SW
8.
Liquid cooled welding Gun
9.
Power cable
10. Earth return lead and clamp
5
SuperSnake GT02S, GT02SW / © Kemppi O
y / 1110