Q-See QSD42908C8 - Manual (Page 48)

QSD42908C8 User’s Manual
48
Fig 5.16 Video signal loss handle setup
Step 4: Setup alarm schedule: You can setup a working schedule. The DVR will only
respond when the video loss occurs during the schedule.
Note: The 4 time periods can not be repeated. Please reboot DVR to make parameters
effective.
Step 5: Setup alarm policy: You can select one or more response solutions, including “On
Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger Alarm Output”. You can
use
【↑】【↓】and 【EDIT】key to enable or disable them. “×” is disabled and “9” is enabled.
Step 6: Save alarm setup: After your setup, press “Confirm” button and return to
“Advanced setting” interface. Press “Confirm” button to save current camera parameters and
return to main menu.
Step 7: Save all cameras: If you want to setup other cameras, please repeat step2 to step 6.
In “Camera” menu, press “Confirm” key to save all cameras parameters. Press “Cancel” button or
【ESC】key to abort.