Q-See QSD42908C8 - Manual (Page 33)

QSD42908C8 User’s Manual
33
Chapter 5 Parameters Setup Guide
Only the users that have “Parameters Setup” right need to read this chapter. When
the following parameters are modified and saved, you must reboot the DVR to make
the new parameters take into effective. Other parameters do not require a reboot.
z Any network parameters
z Resolution and record schedule
z External alarm sensor type
z View tampering alarm schedule
z Video lost alarm schedule
z Motion detection alarm schedule
z External alarm schedule
z Alarm output schedule
5.1 Administrator and Password
When DVR comes from the factory, there is one default administrator. The name
is “admin” and password is “12345”. The name can not be changed, while the
password can be.
Password modification
Press
【MENU】key, in the login dialog box, select the username as “admin”, use
【→】key, to move cursor to password edit box, input “12345”, press “Confirm” to
enter into administrator menu.