JLCooper MCS5 - Manual (Page 18)

Some key/modifier combinations may be intercepted by the operating system before they reach the
Inspector window. If this happens, just type the key without any modifiers, then click on the appropriate
checkboxes to add the desired modifiers.
To add more keystrokes to the sequence, click on the Next button and repeat the above procedure. You
can move forwards or backwards in the sequence with the Next and Previous buttons. The Delete
Keystroke button will remove the currently displayed keystroke from the sequence.
If Repeat while pressed is checked, the keystroke (or sequence) will repeat as long as the MCS5 control
is held down. The speed of the repeat is controlled by the Repeat/Typing Speed slider. This slider also
determines how much time there is between keystrokes if the sequence is more than one keystroke.
If the key sequence in the example below was assigned to the W5 button, pressing W5 would be the
equivalent of typing the word “mark”.
MCS5 User Manual
18