Datalogic Scanning C-BOX 300 - Manual (Page 27)

INSTALLATION
2
2.6 CONFIGURATION SWITCH AND 9-PIN INTERNAL CONNECTOR
The 9-pin internal connector may have two different functions according to the
position of the configuration switch.
Figure 13 - Configuration Switch and 9-pin Male Connector
POSITION MODE
Normal Operation (default): In this position, the C-BOX 3X0 is in the
normal operating mode. It communicates with the scanner through
the 9-pin internal connector and the scanner auxiliary serial interface.
The internal connector pinout is illustrated in the following table:
9-pin C-Box 3x0 connector pinout in Normal mode
Pin Name
1 NC
2 RXA
3 TXA
4 NC
6 NC
9 NC
DS2100A
DS2400A
DS4600A Matrix-2000™ Matrix-1000™
5 SGND SGND GND GND
7 CTSA SGND AUX GND GND
8 RTSA GND NC NC
15