Jetway Computer NMF95-Q87 - Manual (Page 27)

23
This item should be set as [Disabled] for Windows XP.
Execute Disable Bit
The optional settings: [Disabled]; [Enabled].
Intel Virtualization Technology
The optional settings: [Enabled]; [Disabled].
When set as [Enabled], a VHM can utilize the additional hardware capabilities
provided by Vanderpool Technology.
EIST
Use this item to enable or disable Intel SpeedStep.
Turbo Mode
Use this item to enable or disable Turbo Mode.
*This item might not be available depending on configuration.
Energy Performance
Use this item to optimize between performance and power savings.
The optional settings are: [Performance]; [Balanced Performance]; [Balanced
Energy]; [Energy Efficient].
*This item might not be available depending on configuration.
CPU C Status
Use this item to enable or disable CPU C status.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
CPU C6 Report
Use this item to enable or disable CPU C6 report to OS.
CPU C7 Report
Use this item to enable or disable CPU C7 report to OS.
The optional settings are: [Disabled]; [CPU C7]; [CPU C7s].

SATA Configuration
Press [Enter] to make settings for the following sub-items:
SATA Controller(s)
The optional settings: [Disabled]; [Enabled].
*Note: ‘SATA Controller’ should be set as [Enabled] for ‘SATA Mode Selection’,
‘Aggressive LPM Support’ and ‘SATA Controller Speed’ to show up for further
settings.
SATA Mode Selection
The optional settings are: [IDE]; [AHCI]; [RAID]*.
*Note: [RAID] mode is only supported by Model NMF95-Q87.
*When set as [IDE] or [RAID]* (optional forNMF95-Q87), user can make further
settings in ’IDE Legacy/Native Mode Selection’.
IDE Legacy/Native Mode Selection
The optional settings are: [Native]; [Legacy].
*When set as [AHCI] or [RAID]* (optional forNMF95-Q87), user can make further
settings in the following items:
Aggressive LPM Support
Use this item to enable PCH to aggressively enter link power state.
The optional settings: [Enabled]; [Disabled].
SATA Controller Speed
The item is for user to set the maximum speed the SATA controller can support.