Jetway Computer NMF95-Q87 - Manual (Page 25)

21
3-7 Advanced Menu
ERP Function
Use this item to set ERP function for this board.
The optional settings are: [Auto]; [Disabled].
This item should be set as [Disabled] if you wish to have Active All Wakeup Function.

PCI Subsystem Settings
Press [Enter] to enter and make settings for the following sub-items:
PCI Common Settings:
PCI Latency Timer
Use this item to set value to be programmed into PCI latency timer register.
VGA Palette Snoop
Use this item to enable or disable VGA palette registers snooping.
PERR# Generation
Use this item to enable or disable PCI device to generate PERR#.
SERR# Generation
Use this item to enable or disable PCI device to generate SERR#.
 PCI Express Settings
Press [Enter] to make settings for the following sub-items:
PCI Express Device Register Settings:
Relaxed Ordering
Use this item to enable or disable PCI express device relaxed ordering.
Extended Tag
If set as [Enabled] it will allow device to use 8-bit tag field as a requester.
No Snoop
Use this item to enable or disable PCI Express device No Snoop option.
Maximum Payload