Ivoclar Vivadent Compoglass Flow - Manual

Compoglass ®
Flow
Description
Compoglass
® Flow is a flowable, light-curing, radiopaque compomer-based
restorative material. Compoglass Flow cures with light in the wavelength
range of 400–500 nm (blue light). Compoglass Flow combines the
advantages of glass ionomer cements with those of light-curing composite
materials.
Shades
Compoglass Flow is available in the following shades
(Chromascop/A-D shades):
140/A2, 210/A3, 230/A3.5, 340/A4
Composition
The monomer matrix consists of urethane dimethacrylate, tetraethylene
glycol dimethacrylate and cycloaliphatic dicarboxilic acid dimethacrylate
(32.9 wt.%). The inorganic fillers include ytterbium trifluoride, Ba-Al-
fluorosilicate glass and spheroid mixed oxide (66.8 wt.%). Additional
contents are catalysts, stabilizers, and pigments (0.3 wt.%). The total content
of inorganic fillers is 41.8 Vol.% or 66.8 wt.% respectively. The particle size is
between 0.2 and 3.0 µm.
Indication
–
Restoration of deciduous teeth
– Class V restorations (cervical caries, root erosion,
wedge-shaped defects)
– Anterior Class III restorations
– Temporary restorations
Contraindication
The placement of Compoglass Flow restorations is contraindicated
–
if a patient is known to be allergic to any of the ingredients of
Compoglass Flow;
– if the stipulated working technique cannot be applied;
– for direct and indirect pulp capping;
– for permanent, stress-bearing occlusal restorations in teeth of the
secondary dentition.
Side effects
In rare cases, ingredients of Compoglass Flow may cause a sensitizing
reaction. The product should not be used in such cases. To avoid possible
irritation of the pulp, areas close to the pulp should be protected with a
suitable pulp/dentin protector (apply a calcium hydroxide-based preparation
to areas in close proximity of the pulp) and covered with an adequate
lining.
Interactions
Substances containing eugenol/clove oil may inhibit the polymerization of
compomers. These materials must not be used in conjunction with
Compoglass Flow. Discolouration may occur in combination with cationic
mouthwashes, plaque disclosing agents and chlorhexidine.
English
Manufacturer
Ivoclar Vivadent AG
FL-9494 Schaan/Liechtenstein
www.ivoclarvivadent.com
Rx ONLY
Date information prepared:
2013-06-05/Rev. 1
573128/WE3
2°C
36°F
28°C
82°F
EN Instructions for Use
– Light-curing compomer-based dental
restorative material
DE Gebrauchsinformation
– Lichthärtender zahnärztlicher
Füllungskunststoff auf
Compomerbasis
FR Mode d’emploi
– Matériau de restauration compomer
photopolymérisable
IT Istruzioni d’uso
– Materiale dentale da otturazione a
base di compomero, fotoindurente
ES Instrucciones de uso
– Material de restauración dental
fotopolimerizable en base a
compómero
PT Instruções de Uso
– Cômpomero fotopolimerizável para
restauração dental
SV Bruksanvisning
– Ljushärdande flytande,
fyllnadsmaterial på compomerbas
DA Brugsanvisning
– Lyspolymeriserende dentalt
plastfyldningsmateriale på
kompomerbasis
FI Käyttöohjeet
– Valokovetteinen
kompomeeripohjainen täytemateriaali
NO Bruksanvisning
– Lysherdende fyllingsmateriale på
compomerbasis
NL Gebruiksaanwijzing
– Lichtuithardend tandheelkundig
vulmateriaal op compomeerbasis
EL Oδηγίες Xρήσεως
– Φωτοπολυμεριζόμενο υλικό
οδοντιατρικών αποκαταστάσεων
βασισμένο σε συμπολυμερή
TR Kullanma Talimatı
– Iflıkla sertleflen, kompomer esaslı
dental restoratif materyal
RU àÌÒÚÛ͈Ëfl ÔÓ
ÔËÏÂÌÂÌ˲
– ë‚ÂÚÓÓÚ‚Âʉ‡ÂÏ˚È
ÂÒÚ‡‚‡ˆËÓÌÌ˚È Ï‡ÚÂˇΠ̇
ÍÓÏÔÓÏÂÌÓÈ ÓÒÌÓ‚Â
PL Instrukcja stosowania
– Płynny, Êwiatłoutwardzalny, materiał
kompomerowy do wypełnieƒ
Compoglass Flow_AdheSE_GI_WE3_573128_REV1_CompoglassFlow_Adhe-GI-WE3.qxd 17.06.13 09:48 Seite 1